The ERMAKSAN CNC Hydraulic Press Brake is designed via SOLID WORKS 3D programming, which is created by using improved ST44-1 quality steel that has latest technology.
Ideal Solutions for Heavy Duty Bends
The configuration of CNC Hydraulic Press Brake is perfect for use in assorted bending works, heavy-duty in nature. The final results (calculated precisely) are proportional to the deep and full-length bending. Other three key features of these brakes are:
Continuant precision with a crowning system, which is dynamic in nature
A very rigid structure, which heavy-duty and long lasting
Simple to use and give training
General Features of CNC Hydraulic Press Brake
Compact construction, robust built, consistent operation and low power consumption
Cylinders are painted with chrome and are made with 0.001 mm precision
Pistons are durable in nature and are specially stiffened
Front support arms are movable along side the length of machine. The height of these arms can be adjusted easily.
Internationally appreciated HOERBIEGER hydraulics are manufactured as per the CE standards.
Tools are tightened easily
Rear guard is supported with 2 photocells on each side
Sensitivity of optic linear scales is up to 0.001 mm.
HEIDENHAIN and GIVI MISURE linear scales
Control unit which is mobile in nature, is hanged on a pendant arm. This gives a wide angle to the operator.
SIEMENS electrical system.
In addition to all these features, CNC Hydraulic Press Brakes are very user-friendly. This is ensured with the presence of mobile control unit which is ergonomic and is suitable for tandem applications. Further, when the machine is in operation, automatic axis referencing is done. The brakes can also be upgraded with other equipment having assorted cont- roller options. The side guards present in these press brakes are standardized as per the CE standards.
Syncronized working cylinders deliver unquestionable results along with having the perfect repeatability ratio.
Standard controller: Sybelec modeva 12S
2 axis ultra strong back gauging system (X=800 and R), with 0.01 mm repeatability, moves along rails and ball screw, bending length controlled by CNC controller, foldable back gauge fingers for reverse bending applications.
All the sheet plates are unable to stand this power, as these CNC press brakes deliver:
More Powerful Bends
Repetitive and top-notch bending is acquired via synchronized cylinders and valves.
The very first time machine is started, calibration and axis referencing is done automatically
Rigid top beam working by 12 slide surface and on 8-point bearing blocks, with 0.01 mm bending accuracy.
High pressure pump is provided
General Specifications of CNC Hydraulic Press Brake
6 topics-sensitive function keys.
Change Inch/mm, TON/TONS, etc..
Ethernet RJ45 and 2 x USB ports.
Integrated 3,5” floppy-disk (optional CD-ROM, LS 120, or others).
Large-key keyboard (mechanical movement) and integrated track sensor.
Printer output and 2 x RS232 ports.
Speed, stop time and top plate measurement leaking.
Standard PC 1200 computer simulation programme.
TFT 12” high-resolution color display.
VGA display output.
Windows XP operating system.
General Specifications of Delem DA-66T
17” high resolution colour TFT.
2D graphical touch screen programming mode.
3D visualisation in simulation and production.
Delem Modusys compatibility. (module scalability and adaptivity)
Full Windows application suite.
Open system architecture.
Sensor bending & correction interface.
USB, peripheral interfacing.
User specific application support within the controllers multitasking environment.
Full touch screen control. (IR-touch)
1280 x 1024 pixels, 32 bit colour.
17” TFT, high brightness.
3D graphics acceleration.
Color LCD display.
Standard Windows® networking.
Storage capacity 256 MB.
USB flash memory drive.
Product naming is done using alphanumeric system.
Product programming as well as visualization is done in real-scale
The calculation of bend sequence is done automatically
Simple graphical bend sequence swap and move.
Hemmed products programming.
One page programming table.
Emark ER-90 General Specifications
17 "LCD touch-screen that facilitates sights of machine body, mould, back gauge, side protection guards, and components .
2D and 3D programming.
2D DXF import feature.
3-D drawing feature.
Angle measurement and control through IMG 100 system.
Application of digital protractor.
Automatic bending sequence search and collision control.
Changeable color display unit (buttons, machine color, background color, color patterns, the background).
Configuration that can be made up to 16 axes.
Enabling Tandem type operational application.
Error message display.
External attachment possibility of keyboard and mouse.
Inch / mm, t / ustons unit alterations.
Motorized front-support system.
Multi- functional alpha numeric keyboard.
Windows-style operating system.
Shift to Speed-Bend
High Bending Speed
High Bending Accuracy
High Bending Capacity
Repetitive and qualitative bending is ensured in the product. It is acquired with the use of synchronized valves and cylinders. 8-point bearings are present on which the sturdy upper beams runs on. The bending precision is of 0.01 mm.